• Skip to primary navigation
  • Skip to main content
Technical Specialties Company, Inc.

800.874.0877

  • Home
  • Services
    • Custom Extrusions
      • Custom Rubber Extrusions
      • Custom Plastic Extrusions
    • Custom Molded Parts
    • Rubber to Metal Bonding
    • Custom Die-Cuts
    • Custom Finishing
  • Products
    • Elevator Astragals
    • Custom Gaskets
      • Die-Cut Gaskets
      • Molded Gaskets
      • Adhesive Backed & Pressure Sensitive Gaskets
      • Spliced Endless Gaskets
    • O-Rings
      • Encapsulated O-Rings
      • Hollow Extruded O-Rings
    • Washers & Seals
    • Stripping
    • End Caps & Tips
    • Bumpers & Feet
    • Tubing
    • Electrically Conductive
  • Resources
    • Elastomer Comparison Chart
    • Blog
  • About TSC
  • Contact
  • from Rubber, Foam and Plastic
    Custom Extrusions
  • Custom Die Cut Gaskets
You are here: Home / Services / Custom Molded Parts

Custom Molded Rubber Parts

Our extensive experience in solid rubber molding includes conventional compression, injection, and transfer manufacturing processes.

Materials

We utilize a wide range of rubber materials, including:

  • Neoprene
  • EPDM
  • Viton
  • Buna-N
  • Silicone
  • Specialized materials for military, industrial or custom projects

Molding Processes

The custom molding processes offered by Technical Specialties Company, Inc. include compression, transfer and injection molding.

  • Compression Molding – With the compression molding process, the raw material is placed between two molded plates. Then plates are forced together, the material compresses and both heat and pressure cause it to conform to the cavities in the plates. Finally, any excess material is trimmed and the part cures. This method is often utilized when medium precision is required.
  • Transfer Molding – With the transfer molding process, the raw material is inserted via a preform transfer pot into the mold cavity.  The preform rubber is heated, forced into a funnel shaped opening down into the mold cavity with a plunger, where it cures and is eventually ejected from the mold. This method is used for medium to high precision parts or instances when colored molded parts are needed.
  • Injection Molding – During the injection molding process, the raw material is heated and fed into the mold cavity via an injection nozzle. The rubber cures, and the molded part is then ejected from the mold. This method is ideal when a large volume of medium to high precision parts is needed.

Technical Specialties Company, Inc. has a long-standing history of manufacturing custom molded rubber parts like O Rings, Bumpers, End Caps and Tips, Grommets and much, much more. 

It is our goal to be the only source you need for competitively priced rubber products. Fill out our “>online contact form or call us today at 800-874-0877.

Technical Specialties Company, Inc. RoHS Compliant REACH Compliant

Email: sales@technicalspecialties.com
Phone: 800.874.0877
4483 Tubular Run • Land O'Lakes, FL 34638

© 2015-2023 Technical Specialties Company, Inc., All rights reserved

Site by Industrial Webworks

 

MENU
  • Home
  • Services
    • Custom Extrusions
      • Custom Rubber Extrusions
      • Custom Plastic Extrusions
    • Custom Molded Parts
    • Rubber to Metal Bonding
    • Custom Die-Cuts
    • Custom Finishing
  • Products
    • Elevator Astragals
    • Custom Gaskets
      • Die-Cut Gaskets
      • Molded Gaskets
      • Adhesive Backed & Pressure Sensitive Gaskets
      • Spliced Endless Gaskets
    • O-Rings
      • Encapsulated O-Rings
      • Hollow Extruded O-Rings
    • Washers & Seals
    • Stripping
    • End Caps & Tips
    • Bumpers & Feet
    • Tubing
    • Electrically Conductive
  • Resources
    • Elastomer Comparison Chart
    • Blog
  • About TSC
  • Contact